Manpage of 'XkbKeyNumGroups' on UHLU - BSD System Documentation,
Programming Reference, Manual Pages and Source Code
All manual pages         All RFC pages
Common page
for XkbKeyNumGroups
Other pages
for XkbKeyNumGroups
More pages
containing XkbKeyNumGroups

Section 3 manual page or howto for 'XkbKeyNumGroups'  

XkbKeyNumGroups(3)		 XKB FUNCTIONS		    XkbKeyNumGroups(3)



NAME
       XkbKeyNumGroups	- Returns the number of groups of symbols bound to the
       key corresponding to keycode

SYNOPSIS
       int XkbKeyNumGroups macro ( xkb, keycode )

	     XkbDescPtr xkb;
	     KeyCode keycode;

ARGUMENTS
       - xkb  Xkb description of interest

       - keycode
	      keycode of interest

DESCRIPTION
       The group_info field of an XkbSymMapRec is an encoded value  containing
       the  number of groups of symbols bound to the key as well as the speci-
       fication of the treatment of out-of-range groups. It is legal for a key
       to  have  zero  groups,	in which case it also has zero symbols and all
       events from that key yield NoSymbol.  To obtain the number of groups of
       symbols bound to the key, use XkbKeyNumGroups.  To change the number of
       groups bound to a key, use XkbChangeTypesOfKey.	To obtain a mask  that
       determines  the	treatment  of out-of-range groups, use XkbKeyGroupInfo
       and XkbOutOfRangeGroupInfo.

       The keyboard controls contain a groups_wrap field specifying  the  han-
       dling  of illegal groups on a global basis. That is, when the user per-
       forms an action causing the effective group to  go  out	of  the  legal
       range,  the  groups_wrap field specifies how to normalize the effective
       keyboard group to a group that is legal for the keyboard  as  a	whole,
       but  there is no guarantee that the normalized group will be within the
       range of legal groups for any individual key.  The  per-key  group_info
       field  specifies  how  a  key treats a legal effective group if the key
       does not have a type specified for the group of concern.  For  example,
       the  Enter key usually has just one group defined. If the user performs
       an action causing the global keyboard group to change  to  Group2,  the
       group_info  field for the Enter key describes how to handle this situa-
       tion.

       Out-of-range groups for individual keys are mapped  to  a  legal  group
       using  the same options as are used for the overall keyboard group. The
       particular type of mapping used is controlled by the bits  set  in  the
       group_info flag, as shown in Table 1.

	  Table 1 group_info Range Normalization
       ----------------------------------------------
       Bits set in group_info	Normalization method
       ----------------------------------------------
       XkbRedirectIntoRange	XkbRedirectIntoRange
       XkbClampIntoRange	XkbClampIntoRange
       none of the above	XkbWrapIntoRange

       The  Xkb  extension is composed of two parts: a server extension, and a
       client-side X library extension.  This chapter discusses functions used
       to  modify controls effecting the behavior of the server portion of the
       Xkb extension. X Library Controls discusses functions  used  to	modify
       controls  that  affect  only  the behavior of the client portion of the
       extension; those controls are known as Library Controls.

       Xkb contains control features that affect the entire keyboard, known as
       global  keyboard  controls.  Some  of  the  controls may be selectively
       enabled and disabled; these controls are known as the Boolean Controls.
       Boolean	Controls can be turned on or off under program control and can
       also be automatically set to an on or off condition when a client  pro-
       gram  exits. The remaining controls, known as the Non-Boolean Controls,
       are always active. The XkbControlsRec structure describes  the  current
       state  of  most of the global controls and the attributes effecting the
       behavior of each of these Xkb features. This chapter describes the  Xkb
       controls and how to manipulate them.

       There  are  two	possible  components for each of the Boolean Controls:
       attributes describing how the control should work, and a state describ-
       ing  whether  the  behavior  as	a  whole  is enabled or disabled.  The
       attributes and state for most of these controls are held in the XkbCon-
       trolsRec structure.

       You can manipulate the Xkb controls individually, via convenience func-
       tions, or as a whole. To treat them as a group, modify  an  XkbControl-
       sRec structure to describe all of the changes to be made, and then pass
       that structure and appropriate flags to an Xkb library function, or use
       a  XkbControlsChangesRec to reduce network traffic. When using a conve-
       nience function to manipulate one control individually, you do not  use
       an XkbControlsRec structure directly.

       The Xkb controls are grouped as shown in Table 2.


						      Table 2 Xkb Keyboard Controls

       ----------------------------------------------------------------------------------------------------------------------------


       Type of Control									   Control Name 	  Boolean Control?
       ----------------------------------------------------------------------------------------------------------------------------
       Controls for enabling and disabling other controls				   EnabledControls	  No
											   AutoReset		  No

       Control for bell behavior							   AudibleBell		  Boolean
       Controls for repeat key behavior 						   PerKeyRepeat 	  No
											   RepeatKeys		  Boolean
											   DetectableAutorepeat   Boolean

       Controls for keyboard overlays							   Overlay1		  Boolean
											   Overlay2		  Boolean

       Controls for using the mouse from the keyboard					   MouseKeys		  Boolean
											   MouseKeysAccel	  Boolean

       Controls for better keyboard access by						   AccessXFeedback	  Boolean
       physically impaired persons							   AccessXKeys		  Boolean
											   AccessXTimeout	  Boolean
											   BounceKeys		  Boolean
											   SlowKeys		  Boolean
											   StickyKeys		  Boolean

       Controls for general keyboard mapping						   GroupsWrap		  No
											   IgnoreGroupLock	  Boolean
											   IgnoreLockMods	  No
											   InternalMods 	  No

       The individual categories and controls are described first, together with
       functions for manipulating
       them.

       STRUCTURES
	      The KeySymMapRec structure is defined as follows:

	   #define XkbNumKbdGroups	       4
	   #define XkbMaxKbdGroup	       (XkbNumKbdGroups-1)

	   typedef struct {		       /* map to keysyms for a single keycode
       */
	       unsigned char	   kt_index[XkbNumKbdGroups];  /* key type index for

       each group */
	       unsigned char	   group_info; /* # of groups and out of range group

       handling */
	       unsigned char	   width;      /* max # of shift levels for key */
	       unsigned short	   offset;     /* index to keysym table in syms array

       */
       } XkbSymMapRec, *XkbSymMapPtr;

       The XkbControlsRec structure is defined as follows:

	   #define XkbMaxLegalKeyCode	  255
	   #define XkbPerKeyBitArraySize  ((XkbMaxLegalKeyCode+1)/8)



	   typedef struct {
	       unsigned char   mk_dflt_btn;	 /* default button for keyboard driven

       mouse */
	       unsigned char   num_groups;	 /* number of keyboard groups */
	       unsigned char   groups_wrap;	 /* how to wrap out-of-bounds groups */
	       XkbModsRec      internal;	 /* defines server internal modifiers

       */
	       XkbModsRec      ignore_lock;	 /* modifiers to ignore when checking

       for grab */
	       unsigned int    enabled_ctrls;	 /* 1 bit => corresponding boolean

       control enabled */
	       unsigned short  repeat_delay;	 /* ms delay until first repeat */
	       unsigned short  repeat_interval;  /* ms delay between repeats */
	       unsigned short  slow_keys_delay;  /* ms minimum time key must be down to

       be ok */
	       unsigned short  debounce_delay;	 /* ms delay before key reactivated */
	       unsigned short  mk_delay;	 /* ms delay to second mouse motion

       event */
	       unsigned short  mk_interval;	 /* ms delay between repeat mouse

       events */
	       unsigned short  mk_time_to_max;	 /* # intervals until constant mouse

       move */
	       unsigned short  mk_max_speed;	 /* multiplier for maximum mouse speed

       */
	       short	       mk_curve;	 /* determines mouse move curve type */
	       unsigned short  ax_options;	 /* 1 bit => Access X option enabled */
	       unsigned short  ax_timeout;	 /* seconds until Access X disabled */
	       unsigned short  axt_opts_mask;	 /* 1 bit => options to reset on Access

       X timeout */
	       unsigned short  axt_opts_values;  /* 1 bit => turn option on, 0=> off */
	       unsigned int    axt_ctrls_mask;	 /* which bits in enabled_ctrls to

       modify */
	       unsigned int    axt_ctrls_values; /* values for new bits in

       enabled_ctrls */
	       unsigned char   per_key_repeat[XkbPerKeyBitArraySize];  /* per key auto

       repeat */

	    } XkbControlsRec, *XkbControlsPtr;
       The XkbControlsRec structure is defined as follows:

	   #define XkbMaxLegalKeyCode	  255
	   #define XkbPerKeyBitArraySize  ((XkbMaxLegalKeyCode+1)/8)


	   typedef struct {
	       unsigned char   mk_dflt_btn;	 /* default button for keyboard driven

       mouse */
	       unsigned char   num_groups;	 /* number of keyboard groups */
	       unsigned char   groups_wrap;	 /* how to wrap out-of-bounds groups */
	       XkbModsRec      internal;	 /* defines server internal modifiers

       */
	       XkbModsRec      ignore_lock;	 /* modifiers to ignore when checking

       for grab */
	       unsigned int    enabled_ctrls;	 /* 1 bit => corresponding boolean

       control enabled */
	       unsigned short  repeat_delay;	 /* ms delay until first repeat */
	       unsigned short  repeat_interval;  /* ms delay between repeats */
	       unsigned short  slow_keys_delay;  /* ms minimum time key must be down to

       be ok */
	       unsigned short  debounce_delay;	 /* ms delay before key reactivated */
	       unsigned short  mk_delay;	 /* ms delay to second mouse motion

       event */
	       unsigned short  mk_interval;	 /* ms delay between repeat mouse

       events */
	       unsigned short  mk_time_to_max;	 /* # intervals until constant mouse

       move */
	       unsigned short  mk_max_speed;	 /* multiplier for maximum mouse speed

       */
	       short	       mk_curve;	 /* determines mouse move curve type */
	       unsigned short  ax_options;	 /* 1 bit => Access X option enabled */
	       unsigned short  ax_timeout;	 /* seconds until Access X disabled */
	       unsigned short  axt_opts_mask;	 /* 1 bit => options to reset on Access

       X timeout */
	       unsigned short  axt_opts_values;  /* 1 bit => turn option on, 0=> off */
	       unsigned int    axt_ctrls_mask;	 /* which bits in enabled_ctrls to

       modify */
	       unsigned int    axt_ctrls_values; /* values for new bits in

       enabled_ctrls */
	       unsigned char   per_key_repeat[XkbPerKeyBitArraySize];  /* per key auto

       repeat */
       XkbChangeTypesOfKey(3), XkbKeyGroupInfo(3), XkbOutOfRangeGroupInfo.(3)

	    } XkbControlsRec, *XkbControlsPtr;

       SEE ALSO



X Version 11			 libX11 1.2.1		    XkbKeyNumGroups(3)

NAME - SYNOPSIS - ARGUMENTS - DESCRIPTION -  
All manual pages         All RFC pages
Common page
for XkbKeyNumGroups
Other pages
for XkbKeyNumGroups
More pages
containing XkbKeyNumGroups
A random manual page         All manual pages        All RFC pages